How to Start A Neotec Gas Chainsaw ? A Guide for Beginners 2023 Gas chainsaws are ideal choices for trimming, limbing, bucking and felling. However, where to begin and how to go security is not easy. Let us have a quick read on how to use a chainsaw in a safe and effective way. Start-up Procedure The following steps are available for model NS892 NS892V NS892BV F660V F660VW. Step1. Do a check over of the saw and be sure that engage hand brake before starting. Step2. Follow the instructions located on the left side of the machine. Step3. Push lever Down to bottom position (choke). Step4. Depress the decompression valve. Step5. Ignition. Pull starter rope to the longest and repeat it for three to five times then you will hear a “pop” noise (like a combustion). Step6. Click lever up ONE notch, or the midway position(start). At this point you have the option to push the decompression valve again for a more effortless start. Next, pull the start rope until machine start to run. Attetions: Allow the machine to warm up without revving Disengage hand brake before revving the motor Always engage the chain brake when placing the saw on the ground If the saw is off(up position) and is warm, place lever back to the middle position to start again Conclusion Follow the steps above and with some practice. You should be cutting like a pro in no time. Furthermore, the stability of the saw can be maintained if users do it in the right way. We make every efforts to give you some guide and details about the chainsaw and hope all of you can get the best out of it and enjoy cutting wood logs without any troubles. If you are interested in chainsaws, please check our website
