24 Inch Chainsaw Chain 3/8 Pitch, 0.058" Gauge, 84 Drive Links Full Chisel fits for Husqvarna 555, 562XP, 365, 565, 372XP, 572XP, 390XP, 395 XP, 585, 592 XP
Roll over image to zoom in Click on image to zoom
24 Inch Chainsaw Chain 3/8 Pitch, 0.058" Gauge, 84 Drive Links Full Chisel fits for Husqvarna 555, 562XP, 365, 565, 372XP, 572XP, 390XP, 395 XP, 585, 592 XP

24 Inch Chainsaw Chain 3/8 Pitch, 0.058" Gauge, 84 Drive Links Full Chisel fits for Husqvarna 555, 562XP, 365, 565, 372XP, 572XP, 390XP, 395 XP, 585, 592 XP

Price:
$29.99
Multiple Secure Payment Options
Quality Assurance
Free Delivery within the U.S
Easy Returns & Refunds
Hassle-Free Warranty
Professional Assistance
Secure Payments

FITS THESE POPULAR MODELS:

Dolmar 109, 112, 113, 114, 116, 116SI, 117, 118, 119, 120, PS-460, PS-510, PS-5100S, PS-5100SH, PS-5105, PS-5105 H, PS-540, PS-6000I, PS-6100, PS-6100 H, PS-6400, PS-6400H, PS-6400W, PS-7300, PS-7300H, PS-7300W, PS-7310, PS-7310H, PS-7900, PS-7900H, PS-7900W, PS-7910, PS-7910H, PS-7910W, PS-7910XD, PS-9010, PS-9010FL, PS9000

Echo CS-7310P, CS-7310PW

Efco 156, 165, 181, 956, 962, MT 7200, MT 8200

Husqvarna 1100, 160, 162, 181, 185, 2100, 2101, 254, 254XP, 257, 260, 261, 262, 262XP, 266, 268, 272, 281, 285, 288, 288XP Lite, 298, 3120, 3120XP, 355, 357, 357XP, 357XPG, 359, 359E-TECH, 360, 362, 362 XP, 365, 371, 372, 372XP, 372XPG, 372XPW, 380, 385, 385XP, 385XPG, 385XPW, 390XP, 390XPG, 390XPW, 394, 394XP, 395, 395XP, 395XPG, 395XPW, 455, 455 RANCHER, 455E RANCHER, 460, 460 RANCHER, 465 RANCHER, 466, 480, 51, 55, 55 RANCHER, 555, 560XP, 560XPG, 562XP, 562XPG, 565, 57, 570, 572XP, 572XPG, 575XP, 575XPG, 575XPW, 576XP, 576XP Auto Tune, 576XPG, 576XPW, 61, 65, 66, 70, 77, JUNGLE 3120, L Series

Jonsered 2051, 2054, 2055, 2063, 2065, 2071, 2077, 2083, 2083II, 2094, 2095, 2159, 2163, 2165, 2171, 490, 520, 520SP, 525, 535, 590, 625, 630, 630 Super, 630 West Coast, 670, 670 West Coast, CS 2050, CS 2050 Turbo, CS 2054, CS 2156, CS 2159, CS 2159C, CS 2159CWH, CS 2159WH, CS 2163, CS 2163WH, CS 2165, CS 2166, CS 2171, CS 2171WH, CS 2172, CS 2172WH, CS 2186, CS 2186WH, CS 2188, CS 2255, CS 2258, CS 2260, CS 2260WH

Makita DCS6401, DCS6421, DCS7301, DCS7901, DCS9000, DCS9010FL, EA7300P, EA7900P

Pioneer 1072, 1073, 515, 970, Farmlite, Farmsaw, Farmsaw II, P-11, P-20, P-25, P-285, P-38, P-39, P-41, P-42, P-45, P-50, P-51, P-52, P-60, P-61, P-62

Poulan 405, 415, 425, 445, 455, 475, 505, 525, 655

Red Max GZ7000, GZ7100 Shindaiwa 550, 575, 577, 680, 695, 757, 757C, 757W

FAQS

Cold Start
  1. Add fuel (fuel mixing ratio: 25:1).
  2. Close the choke. If the machine is equipped with a primer bulb, press it 3–5 times until the bulb is filled with fuel.
  3. Pull the starter rope 3–5 times.
  4. After hearing two “coughing” sounds,
  5. Open the choke.
  6. Pull the starter rope to start the machine.
Hot Start
  1. Open the choke.
  2. Pull the starter rope to start the machine.

The issue may be caused by an incorrect fuel mixture, spark plug problems, or a clogged carburetor.

  1. Check whether the fuel mixing ratio is 25:1. If not, adjust the fuel mixture to 25:1.
  2. Check whether the fuel line is bent or blocked.
  3. Check whether the spark plug is sparking properly.
  4. Check whether the engine is flooded.
  5. Check whether there is a carburetor malfunction.
  1. Confirm whether the spark plug is producing a spark: Remove the spark plug, connect it to the ignition coil, and place the spark plug electrode in contact with a metal part of the machine. Pull the starter rope and observe whether the spark plug produces a spark during starting.
  2. Check the electrode gap. The correct gap is 0.5–0.7 mm (approximately the thickness of a credit card).
  3. Clean oil residue and debris from the surface of the spark plug.
  4. If the engine still does not start after completing the above steps, replace the spark plug with a new one.
  5. Check whether the high-voltage wire (ignition coil lead) is damaged.
  1. Remove the spark plug.
  2. Turn the machine upside down.
  3. Pull the starter rope.
  4. Drain the excess fuel from the cylinder.
  1. Remove the air filter.
  2. Use an air blower to remove dust or debris from the air filter.
  3. If it cannot be cleaned or has been used for a long time, replace the air filter.

You may also like