-
About this item
- 【SOIL CULTIVATOR】NEO-TEC Mini Power Cultivator is the perfect machine for anyone who wants complete control over the farming process.
- 【STRONG POWER】 - This tiller has a powerful 52cc gas 2-stroke single-cylinder OHV engine that provides excellent power-to-weight ratio performance. It has a maximum output of 1.47kW and a maximum rotational power of 7500RPM.
- 【UPGRADED DESIGN】The machine has ➡️4 steel rotating teeth that can be adjusted to different depths, ➡️height adjustable wheels, ➡️Fuel tank guard
- 【WIDELY USED 】Our Tiller/Cultivators are great for Garden & Lawn applications in Digging, Soil Cultivation, Aeration, Creating Loose Seedbeds & Dirt/Weed Removal.
- 【WARRANTY】 You'll get a 12-month free warranty to make sure that you have the best experience with NEOTEC. During the use of the product, if you have any suggestions about the product you can send us a message and we will help solve your problem within 24 hours.
NEOTEC MT520 Mini Tiller Cultivator, 52cc 2 Stroke Gas Powered 4 Premium Steel Adjustable Forward Rotating Tines, Height Adjustable Wheels for Garden & Lawn, Digging, Weed Removal & Soil Cultivation
FAQS
Cold Start
- Add fuel (fuel mixing ratio: 25:1).
- Close the choke. If the machine is equipped with a primer bulb, press it 3–5 times until the bulb is filled with fuel.
- Pull the starter rope 3–5 times.
- After hearing two “coughing” sounds,
- Open the choke.
- Pull the starter rope to start the machine.
Hot Start
- Open the choke.
- Pull the starter rope to start the machine.
The issue may be caused by an incorrect fuel mixture, spark plug problems, or a clogged carburetor.
- Check whether the fuel mixing ratio is 25:1. If not, adjust the fuel mixture to 25:1.
- Check whether the fuel line is bent or blocked.
- Check whether the spark plug is sparking properly.
- Check whether the engine is flooded.
- Check whether there is a carburetor malfunction.
- Confirm whether the spark plug is producing a spark: Remove the spark plug, connect it to the ignition coil, and place the spark plug electrode in contact with a metal part of the machine. Pull the starter rope and observe whether the spark plug produces a spark during starting.
- Check the electrode gap. The correct gap is 0.5–0.7 mm (approximately the thickness of a credit card).
- Clean oil residue and debris from the surface of the spark plug.
- If the engine still does not start after completing the above steps, replace the spark plug with a new one.
- Check whether the high-voltage wire (ignition coil lead) is damaged.
- Remove the spark plug.
- Turn the machine upside down.
- Pull the starter rope.
- Drain the excess fuel from the cylinder.
- Remove the air filter.
- Use an air blower to remove dust or debris from the air filter.
- If it cannot be cleaned or has been used for a long time, replace the air filter.