Chain Adjuster Kit Fit For STIHL 034 036 038 MS340 MS360 MS341 MS361 MS380 MS381 MS382 064 066 MS640 MS650 MS660 CHAINSAW OEM 1125 007 1021
Roll over image to zoom in Click on image to zoom
Chain Adjuster Kit Fit For STIHL 034 036 038 MS340 MS360 MS341 MS361 MS380 MS381 MS382 064 066 MS640 MS650 MS660 CHAINSAW OEM 1125 007 1021

Chain Adjuster Kits fit for Stihl 034 036 MS380 MS382 066 MS660 Chainsaw

Price:
$3.10
Multiple Secure Payment Options
Quality Assurance
Free Delivery within the U.S
Easy Returns & Refunds
Hassle-Free Warranty
Professional Assistance
Secure Payments

1PC Thrust Pad ,OEM: 1125 664 1400
1PC Tensioner Slide,OEM: 1125 640 1900
1PC Spur Gear / Chain Adjusting,OEM: 1125 007 1021
1PC O-ring 7x1.5,OEM: 9646 945 0490
1PC Cover Plate,OEM: 1122 664 2200
1PC Pan head screw M4x8,OEM:  9041 216 0630

Parts Name: Chain Adjuster 8pcs 

Fits: Stihl 024 MS240 026 MS260 036 MS360 038 MS380 MS261 MS270 MS280 MS340 MS341 MS441 MS461 044 MS440 046 MS460 064 MS640 066 MS660 Chainsaw

Replace OEM: 1127 007 1003

 

FAQS

Cold Start
  1. Add fuel (fuel mixing ratio: 25:1).
  2. Close the choke. If the machine is equipped with a primer bulb, press it 3–5 times until the bulb is filled with fuel.
  3. Pull the starter rope 3–5 times.
  4. After hearing two “coughing” sounds,
  5. Open the choke.
  6. Pull the starter rope to start the machine.
Hot Start
  1. Open the choke.
  2. Pull the starter rope to start the machine.

The issue may be caused by an incorrect fuel mixture, spark plug problems, or a clogged carburetor.

  1. Check whether the fuel mixing ratio is 25:1. If not, adjust the fuel mixture to 25:1.
  2. Check whether the fuel line is bent or blocked.
  3. Check whether the spark plug is sparking properly.
  4. Check whether the engine is flooded.
  5. Check whether there is a carburetor malfunction.
  1. Confirm whether the spark plug is producing a spark: Remove the spark plug, connect it to the ignition coil, and place the spark plug electrode in contact with a metal part of the machine. Pull the starter rope and observe whether the spark plug produces a spark during starting.
  2. Check the electrode gap. The correct gap is 0.5–0.7 mm (approximately the thickness of a credit card).
  3. Clean oil residue and debris from the surface of the spark plug.
  4. If the engine still does not start after completing the above steps, replace the spark plug with a new one.
  5. Check whether the high-voltage wire (ignition coil lead) is damaged.
  1. Remove the spark plug.
  2. Turn the machine upside down.
  3. Pull the starter rope.
  4. Drain the excess fuel from the cylinder.
  1. Remove the air filter.
  2. Use an air blower to remove dust or debris from the air filter.
  3. If it cannot be cleaned or has been used for a long time, replace the air filter.

You may also like