- M18 BATTERY COMPATIBLE – REUSE YOUR EXISTING BATTERIES: This cordless mini chainsaw works with M18 lithium batteries (including Milwaukee M18 systems), allowing you to reuse batteries you may already own. Simply insert your battery and start cutting — no new battery purchase required. A cost-effective choice for M18 power tool owners, delivering consistent cutting performance. (Note: Battery and charger are NOT included.)
- POWERFUL 1000W BRUSHLESS MOTOR & DUAL-SIZE CUTTING: Equipped with a high-performance 1000W brushless motor delivering 32,000 RPM (49.2 ft/s chain speed), this mini chainsaw cuts through 8-inch branches in seconds with clean, smooth results. Includes both 6-inch and 8-inch guide bars — switch between sizes easily for everything from delicate branch trimming to thicker log cutting. One saw, two sizes, unlimited possibilities.
- LIGHTWEIGHT & EASY ONE-HAND CONTROL: Weighing only 2.7 lbs with an ergonomic wrap-around handle, this mini chainsaw is designed for comfortable one-handed operation. Work in tight spaces, reach overhead branches, or use for extended periods without arm fatigue — perfect for women, seniors, and DIY beginners. The compact design makes it easy to carry and store anywhere.
- COMPLETE SAFETY PROTECTION SYSTEM: Features a two-step safety lock — press and hold the safety button, then squeeze the trigger to start, preventing accidental activation. Includes a chain brake guard triggered by natural grip posture, anti-splash baffle, and non-slip handle for secure grip.
- COMPLETE KIT — 2 CHAINS + 2 BARS + ACCESSORIES: Package includes: 1 × Mini Chainsaw, 1 × 6-Inch Guide Bar, 1 × Additional 8-Inch Guide Bar, 1 × 6-Inch Chains, 1 × 8-Inch Chains, 1 × Safety Gloves, 1 × Goggles,1 × Cleaning Brush. All neatly packed in a portable storage case. Everything you need — just add your Milwaukee M18 battery and oil, and you're ready to go.
6&8 Inch Cordless Mini Chainsaw Compatible with Milwaukee M18 Battery
FAQS
Cold Start
- Add fuel (fuel mixing ratio: 25:1).
- Close the choke. If the machine is equipped with a primer bulb, press it 3–5 times until the bulb is filled with fuel.
- Pull the starter rope 3–5 times.
- After hearing two “coughing” sounds,
- Open the choke.
- Pull the starter rope to start the machine.
Hot Start
- Open the choke.
- Pull the starter rope to start the machine.
The issue may be caused by an incorrect fuel mixture, spark plug problems, or a clogged carburetor.
- Check whether the fuel mixing ratio is 25:1. If not, adjust the fuel mixture to 25:1.
- Check whether the fuel line is bent or blocked.
- Check whether the spark plug is sparking properly.
- Check whether the engine is flooded.
- Check whether there is a carburetor malfunction.
- Confirm whether the spark plug is producing a spark: Remove the spark plug, connect it to the ignition coil, and place the spark plug electrode in contact with a metal part of the machine. Pull the starter rope and observe whether the spark plug produces a spark during starting.
- Check the electrode gap. The correct gap is 0.5–0.7 mm (approximately the thickness of a credit card).
- Clean oil residue and debris from the surface of the spark plug.
- If the engine still does not start after completing the above steps, replace the spark plug with a new one.
- Check whether the high-voltage wire (ignition coil lead) is damaged.
- Remove the spark plug.
- Turn the machine upside down.
- Pull the starter rope.
- Drain the excess fuel from the cylinder.
- Remove the air filter.
- Use an air blower to remove dust or debris from the air filter.
- If it cannot be cleaned or has been used for a long time, replace the air filter.