- POWERFUL & EFFICIENT CUTTING:Equipped with a high-performance 680W motor and precision-hardened chain, this 6-inch cordless mini chainsaw delivers fast, smooth cuts through branches and wood up to 6 inches thick. With a chain speed of 26.24 ft/s, it cuts through 6-inch logs in just 7 seconds—saving time and effort on every task.
- LIGHTWEIGHT & EASY TO HANDLE:Weighing just 1.87 lbs, this mini chainsaw is designed for comfortable one-handed operation. The ergonomic body and soft-grip handle reduce strain during extended use, making it ideal for women, seniors, and DIY beginners. Work in tight spaces or tackle overhead branches with ease.
- COMPLETE SAFETY PROTECTION:Features a two-step safety lock system—press and hold the safety lock, then squeeze the trigger to start—preventing accidental activation. Includes a chain brake guard, anti-splash baffle, and anti-slip handle for secure grip and full control during operation.
- LONG-LASTING POWER & 2-BATTERY SYSTEM:Comes with 2 × 2000mAh rechargeable lithium batteries for extended runtime. A full charge provides up to 30-40 minutes of continuous cutting, with overload and temperature protection to maximize battery life. Swap batteries instantly for uninterrupted work.
- COMPLETE SET — 2 BATTERIES + 3 CHAINS + 2 BARS:Package includes: 1 × Mini Chainsaw (6-inch bar pre-installed), 1 × Additional 6-inch Guide Bar, 2 × Extra Chains (3 total), 2 × 2000mAh Batteries, 1 × Fast Charger, 1 × Oil Bottle (oil not included), 1 × Safety Gloves, 1 × Goggles, 1 × Screwdriver, Guide Plate Sheath ×1, all stored in a portable storage case. Everything you need, ready to go
NEO-TEC 6 Inch Mini Chainsaw Cordless with 2 Batteries + 3 Chains + 2 Bars
FAQS
Cold Start
- Add fuel (fuel mixing ratio: 25:1).
- Close the choke. If the machine is equipped with a primer bulb, press it 3–5 times until the bulb is filled with fuel.
- Pull the starter rope 3–5 times.
- After hearing two “coughing” sounds,
- Open the choke.
- Pull the starter rope to start the machine.
Hot Start
- Open the choke.
- Pull the starter rope to start the machine.
The issue may be caused by an incorrect fuel mixture, spark plug problems, or a clogged carburetor.
- Check whether the fuel mixing ratio is 25:1. If not, adjust the fuel mixture to 25:1.
- Check whether the fuel line is bent or blocked.
- Check whether the spark plug is sparking properly.
- Check whether the engine is flooded.
- Check whether there is a carburetor malfunction.
- Confirm whether the spark plug is producing a spark: Remove the spark plug, connect it to the ignition coil, and place the spark plug electrode in contact with a metal part of the machine. Pull the starter rope and observe whether the spark plug produces a spark during starting.
- Check the electrode gap. The correct gap is 0.5–0.7 mm (approximately the thickness of a credit card).
- Clean oil residue and debris from the surface of the spark plug.
- If the engine still does not start after completing the above steps, replace the spark plug with a new one.
- Check whether the high-voltage wire (ignition coil lead) is damaged.
- Remove the spark plug.
- Turn the machine upside down.
- Pull the starter rope.
- Drain the excess fuel from the cylinder.
- Remove the air filter.
- Use an air blower to remove dust or debris from the air filter.
- If it cannot be cleaned or has been used for a long time, replace the air filter.