NEOTEC Retractable Garden Hose Reel 115ft 5/8 Inch Wall Mount 180° Swivel with 9 Sprayer Nozzle G505835
Key Features
115Ft Hose & Any Length Lock Slow Rewind System
Brass Fitting Hybrid Hose, 200PSI Working & 500PSI Burst Pressure
180° Swivel 200Lbs Bracket & All-Weather UV-Proof Shell
Upgrade Highlights
Built-In Pulley Guide Reduces Kink For Max Coverage
Optimized Hose Route Avoids Tube Twisting And Maintains Stable Water Pressure, Delivering Wide Coverage Up To 20,000 Sq.Ft Without Moving Unit.
Ergonomic Non-Slip 9-Mode High Visibility Nozzle
Anti-Slip Handgrip Nozzle With 9 Adjustable Water Settings, Bright High-Visibility Finish For Quick Finding In Yard.
All Hardware Included For 2-Minute Fast Wall Installation
Complete Mount Accessories Packed Inside, Finish Whole Wall Mount Installation In Only 2 Minutes.
1-Year After-Sales Service & Multi-Scenario Universal Use
Comes With Trustworthy 1-Year After-Sales Support, Perfect For Watering, Car Washing, Pet Bathing And Patio Cleaning.
Product Comparison
Discover More Difference
NEOTEC NCS6800 ProSeries Chainsaw 22" 24“ Guide Bar Versatile Cutting
$199.99 USD
NEOTEC NCS6200A Gas Chainsaw with 18" & 22" Guide Bar, Easy Start, Effortless Cutting
$169.99 USD
NEOTEC NCS6200 ProSeries Chainsaw 20" Forestry Bar with Auto-Oiler System
$159.99 USD
$167.99 USD
NEOTEC NCS5800 58CC Gas Chainsaw 18" & 20" Bar Easy Start for Tree Trimming & Wood Cutting
$149.99 USD
$179.99 USD
59cc
Displacement
56.5cc
Displacement
54.5cc
Displacement
54.5cc
Displacement
2.9kW/ 3.9HP
Max Power
2.6kW/ 3.5HP
Max Power
2.4kW/ 3.2HP
Max Power
2.2kW/ 3.0HP
Max Power
30”/75cm
Max Cutting Diameter
26”/65cm
Max Cutting Diameter
26”/65cm
Max Cutting Diameter
22”/55cm
Max Cutting Diameter
20” , 22” , 24”
Recommended Guide Bar Size
18” , 20” , 22”
Recommended Guide Bar Size
18” , 20” , 22”
Recommended Guide Bar Size
18” , 20”
Recommended Guide Bar Size
7Tx 0.325
Sprocket Type
7Tx 0.325
Sprocket Type
7Tx 0.325
Sprocket Type
7Tx 0.325
Sprocket Type
6 Month Consumer / 3 Month Commercial
Warranty
6 Month Consumer / 3 Month Commercial
Warranty
6 Month Consumer / 3 Month Commercial
Warranty
6 Month Consumer / 3 Month Commercial
Warranty
FAQS
Cold Start
- Add fuel (fuel mixing ratio: 25:1).
- Close the choke. If the machine is equipped with a primer bulb, press it 3–5 times until the bulb is filled with fuel.
- Pull the starter rope 3–5 times.
- After hearing two “coughing” sounds,
- Open the choke.
- Pull the starter rope to start the machine.
Hot Start
- Open the choke.
- Pull the starter rope to start the machine.
The issue may be caused by an incorrect fuel mixture, spark plug problems, or a clogged carburetor.
- Check whether the fuel mixing ratio is 25:1. If not, adjust the fuel mixture to 25:1.
- Check whether the fuel line is bent or blocked.
- Check whether the spark plug is sparking properly.
- Check whether the engine is flooded.
- Check whether there is a carburetor malfunction.
- Confirm whether the spark plug is producing a spark: Remove the spark plug, connect it to the ignition coil, and place the spark plug electrode in contact with a metal part of the machine. Pull the starter rope and observe whether the spark plug produces a spark during starting.
- Check the electrode gap. The correct gap is 0.5–0.7 mm (approximately the thickness of a credit card).
- Clean oil residue and debris from the surface of the spark plug.
- If the engine still does not start after completing the above steps, replace the spark plug with a new one.
- Check whether the high-voltage wire (ignition coil lead) is damaged.
- Remove the spark plug.
- Turn the machine upside down.
- Pull the starter rope.
- Drain the excess fuel from the cylinder.
- Remove the air filter.
- Use an air blower to remove dust or debris from the air filter.
- If it cannot be cleaned or has been used for a long time, replace the air filter.