Key Features
31.8cc 1.9HP Engine Home Pruning & Firewood Cutting
Safety Assurance
14Inch/35cm Max Cut Household Logging
Upgrade Highlights
Lightweight Design
Compact body with well-balanced center of gravity, allowing one-handed operation and less fatigue during long hours of work. Ideal for women users and beginners.
Made from 100% Virgin Plastic Pellets
Featuring higher rigidity, heat resistance, impact resistance and excellent dimensional stability.It greatly improves durability and structural stability for heavy-duty working conditions.
Side Chain Tensioning
Easily adjust the chain from the side of the saw for faster and more convenient maintenance.
Safe Cutting
Fitted with 3/8 LP low‑kickback chain to reduce kickback risk and ensure smooth.
I bought this saw to ride around in the side by side, the quality of this saw is impressive for the cost. I went over everything before starting it found nothing loose and the saw starts and runs great. Impressed that no tuning was needed out of the box. Great job NeoTec
Shipping was great saw would not run pulled the spark plug silicon in the spark plug hole on top of the cylinder got it out got it to someone Run had tune the carb it runs ok for them time being
This is one badass saw. I've cut trees up to 3' dia. This saw can run and cut all day long. The chain is super sharp. I cut down 27 trees ranging in size from 3" to 3'. Hell, if it goes bad tomorrow it has paid for itself 10 times over. GREAT saw
Exactly as described very fast shipping
Effortless operation and a chain that stays sharp make this chainsaw a five-star must-have for any DIY enthusiast.
This saw has totally impessd me for a lower kinda entry level but the good thing so is the easy starting after the first start use a while come back couple hours on position all needed fires right up an it got a little bit of a spunk to it I got mine from Amazon and not directly from here put the saw is a 10 10 Will recommend
It starts runs cuts and idles perfectly no tuning. My dad has a stihl that looks and made pretty much spot on. This one cuts just as good as his. So far very happy bought it as a trail saw for riding sxs.
I have a Stihl MS 290 and 261 with 20” bars for big jobs. However, I learned years ago that having a relatively inexpensive 14” saw for limbing and trees up to 10” in diameter was a great choice. 1) they are light and 2) chains are relatively inexpensive. I used Poulan 14” saws for years but they don’t make them anymore in 14”. I tried this Neotec 14”. Started easily, ran great. No primer bulb. Used 40:1 premix. So far I have gone through 2 tanks of fuel and have been very pleased. Used on soft woods cedar, pine and hardwood like locust. I do keep the chain sharp. Dull chains are a bummer on any saw.
It's powerful, easy to handle, and incredibly durable.
It's a quality lightweight saw. When you're carrying it, PPE, fuel/oil/tools, and FAK down the trail, every pound matters.
Product Comparison
Discover More Difference
![[7-Day Pre-Order]Neo-tec NS846 45cc Gas Chainsaw with 16 inch Chainsaw Bar and Chain](http://neotecworld.com/cdn/shop/files/IMG_1871.jpg?v=1735199438&width=400)
with Cutting Attachment
with Cutting Attachment
with Cutting Attachment
at Idle Speed
at Idle Speed
at Idle Speed
FAQS
Cold Start
- Add fuel (fuel mixing ratio: 25:1).
- Close the choke. If the machine is equipped with a primer bulb, press it 3–5 times until the bulb is filled with fuel.
- Pull the starter rope 3–5 times.
- After hearing two “coughing” sounds,
- Open the choke.
- Pull the starter rope to start the machine.
Hot Start
- Open the choke.
- Pull the starter rope to start the machine.
The issue may be caused by an incorrect fuel mixture, spark plug problems, or a clogged carburetor.
- Check whether the fuel mixing ratio is 25:1. If not, adjust the fuel mixture to 25:1.
- Check whether the fuel line is bent or blocked.
- Check whether the spark plug is sparking properly.
- Check whether the engine is flooded.
- Check whether there is a carburetor malfunction.
- Confirm whether the spark plug is producing a spark: Remove the spark plug, connect it to the ignition coil, and place the spark plug electrode in contact with a metal part of the machine. Pull the starter rope and observe whether the spark plug produces a spark during starting.
- Check the electrode gap. The correct gap is 0.5–0.7 mm (approximately the thickness of a credit card).
- Clean oil residue and debris from the surface of the spark plug.
- If the engine still does not start after completing the above steps, replace the spark plug with a new one.
- Check whether the high-voltage wire (ignition coil lead) is damaged.
- Remove the spark plug.
- Turn the machine upside down.
- Pull the starter rope.
- Drain the excess fuel from the cylinder.
- Remove the air filter.
- Use an air blower to remove dust or debris from the air filter.
- If it cannot be cleaned or has been used for a long time, replace the air filter.