NEOTEC 12" Compact Bar 3/8LP .050 Gauge 44DL Chain 25cc Chainsaws
12-Inch Lightweight Bar & Chain Kit for Chinese 25cc Chainsaws
3/8LP .050 Gauge Mini Bar Set with Low-Kickback Chain Design
NEOTEC Compact Chainsaw Combo for Small Woodworking Projects
12" Precision-Cut Bar with 44DL Chain for Homeowner Chainsaws
12" Precision-Cut Bar with 44DL Chain for Homeowner Chainsaws
12" Precision-Cut Bar with 44DL Chain for Homeowner Chainsaws
Roll over image to zoom in Click on image to zoom
NEOTEC 12" Compact Bar 3/8LP .050 Gauge 44DL Chain 25cc Chainsaws12-Inch Lightweight Bar & Chain Kit for Chinese 25cc Chainsaws3/8LP .050 Gauge Mini Bar Set with Low-Kickback Chain DesignNEOTEC Compact Chainsaw Combo for Small Woodworking Projects12" Precision-Cut Bar with 44DL Chain for Homeowner Chainsaws12" Precision-Cut Bar with 44DL Chain for Homeowner Chainsaws12" Precision-Cut Bar with 44DL Chain for Homeowner Chainsaws

NEOTEC NCS2500 Chainsaw Bar, 12 Inch 3/8 LP .050 44DL Chain Guide Bar Combo fit for 25cc 25.4cc Chinese Chainsaw

Price:
$28.99
Multiple Secure Payment Options
Quality Assurance
Free Delivery within the U.S
Easy Returns & Refunds
Hassle-Free Warranty
Professional Assistance
Secure Payments

About this item

  • Includes: 12 inch 3/8"LP .050" 44DL Saw chain and Guide Bar Combo
  • Compatible with NEOTEC NCS2500 Chainsaw
  • Compatible with Stihl MS170 MS180 MS181 MS190 MS191T MS192T MS200 MS210 MS211 MS230 MS250 017 018 020 021 023 025 NEOTEC NCS2500 Chainsaw
  • Note: Please check the chain or bar parameters carefully, do not order just by your model number.
  • Our Chainsaw Accessories made of high quality material, durable and practical to use

FAQS

Cold Start
  1. Add fuel (fuel mixing ratio: 25:1).
  2. Close the choke. If the machine is equipped with a primer bulb, press it 3–5 times until the bulb is filled with fuel.
  3. Pull the starter rope 3–5 times.
  4. After hearing two “coughing” sounds,
  5. Open the choke.
  6. Pull the starter rope to start the machine.
Hot Start
  1. Open the choke.
  2. Pull the starter rope to start the machine.

The issue may be caused by an incorrect fuel mixture, spark plug problems, or a clogged carburetor.

  1. Check whether the fuel mixing ratio is 25:1. If not, adjust the fuel mixture to 25:1.
  2. Check whether the fuel line is bent or blocked.
  3. Check whether the spark plug is sparking properly.
  4. Check whether the engine is flooded.
  5. Check whether there is a carburetor malfunction.
  1. Confirm whether the spark plug is producing a spark: Remove the spark plug, connect it to the ignition coil, and place the spark plug electrode in contact with a metal part of the machine. Pull the starter rope and observe whether the spark plug produces a spark during starting.
  2. Check the electrode gap. The correct gap is 0.5–0.7 mm (approximately the thickness of a credit card).
  3. Clean oil residue and debris from the surface of the spark plug.
  4. If the engine still does not start after completing the above steps, replace the spark plug with a new one.
  5. Check whether the high-voltage wire (ignition coil lead) is damaged.
  1. Remove the spark plug.
  2. Turn the machine upside down.
  3. Pull the starter rope.
  4. Drain the excess fuel from the cylinder.
  1. Remove the air filter.
  2. Use an air blower to remove dust or debris from the air filter.
  3. If it cannot be cleaned or has been used for a long time, replace the air filter.

You may also like