Key Features
54.5cc Gold-displacement Engine, Perfect for Various Working Conditions.
Safety Assurance
26"/65cm Max Cutting Diameter
Upgrade Highlights
Optimized CDI Ignition System
Whether facing freezing temperatures or scorching heat, it delivers dependable, consistent power to keep you working without interruption.
Effortless Cold Start
Starts in just 3–5 pulls even in low temperatures, helping you save time and keep productivity up on chilly mornings.
Quick-detach Air Filter Cover
Upgraded with a quick-release structure and quick-detach air filter cover for easier cleaning and maintenance
Speed-Automatic Oil Pump
The speed-automatic oil pump delivers adaptive chain lubrication in real time, ensuring smooth operation with reduced friction and effective overheat protection. It maintains optimal cutting performance and greatly extends the service life of the chain and guide bar.
I have had this saw for 2.5 years. It starts very easily. It cuts pine, oak, hickory or any other wood like butter. Saw has plenty of power and dependable! It cuts as good as other brands that cost 700-800 dollars to purchase!
It rips! First start took 10 pulls. But after that will start in 2-3 from cold.. Once running, shut off, start again first pull every time. Powerful, loud, and almost no vibration! Sure drinks the gas fast
Lanyard point should be either centered or on left side of the saw as most climbers are right handed. Saw started from cold and dry on the fourth pull... Primed bulb, pulled on full choke three times and off choke once. Runs like a scalded dog. I've been a climber for over 14 years and will say this is comparable to Echo or Husqvarna... Stihl still beats it for balance and weight but for the price it can't be beat. I will give it 4 out of 5 stars. Wish it used less different fasteners and I recommend tightening everything prior to use. 25:1 ratio isn't that hard to figure out folks, especially if you are used to 2 cycle equipment. Can't wait to climb with it. Good on the manufacturer for making a saw at this quality and price point. I ordered the 20" saw so we shall see...
O.K., I have used this saw to remove a 40ft. palm tree from a back yard over a shed... Saw ran flawlessly, idled well, I recommend setting the lock when on your hip. I noticed that I had to refuel about 2/3 way chunking the trunk (12-14") but not unusual... Could have a larger gas tank... I also would give the oiling adjustment a better indicator as it tends to oil less on softer materials, but overall I would give this saw a 4-1/2 out of five stars as the next closest saw (Echo) cost three times as much. It never bogged down or acted in any way like it couldn't handle the chore so I'm a believer... We shall see what the 20" saw does on Friday when it arrives...
Impressed with the build quality right out of box. Came with emergency tool kit, should have all in it you'd ever need in the field. Came with little gas can with measurements to properly mix gas and little funnel. Seems very sturdy, of course its not the fastest thing, but for price point i couldn't be more pleased. Started and ran fine for me on 2nd pull. Very happy would def recommend
What a great saw. I have cut 4 full cords eazy. The saw does have lots of plastic so makes me wonder on how long it will last. I can at least tell you this, if you need a saw on the cheap this will do the job. It has plenty of power.
Very balanced and easy starting chainsaw! Cut very well!
This saw is great runs really good you will have to adjust the carburetor right out of the box it was running really rich the only complaint I have is the hole for your saw lanyard could be bigger this saw is a budget saw so not as top notch as far as Husqvarna or steel but but still a dang good climbing saw for the money
I bought this saw for trail maintenance. It’s wicked light and cuts awesome. Great little inexpensive saw. I figured if something breaks I’ll just replace it because of the cost is so low. I did have to make a couple adjustments to the carb for optimal performance.
So happy with chainsaw I have four of th62cc 72cc and also 92 CC
Saw is nice and strong. A bit noise but it don’t matter. One thing to look out for is the double oil ratio per gallon. It’s not a 50-1 saw so you will need a separate gas can just for it. Out side of that. Runs and cuts good.
Great saw very easy to start and durable very pleased
Brand new purchase, arrived today and doesnt start.
This Chainsaw cuts like a dream and fired up right out of the box! Well done NeoTec!!
Great product!
They saw starts easy, and runs well. I have only used two tanks of fuel so I’m still breaking it in.
Saw is runs great ans plenty of power, the only thing was the rubber seal on the oil and gas cap where hard and cause them to leak, customer service said they would send new one
Great saw wish I had known about neo tech sooner it works better than my other name brand saw
Bought this back in 2025. I have ran about 2 gallon through this. About ready to tune the saw to 50:1 . Best chainsaw every bought for the price. Really thinnking eventually getting a Farmmac through ya all. Thanks so much.
Great saw runs great and cuts great would definitely buy again
NEOTEC NCS6200 ProSeries Chainsaw | 62CC 20" Forestry Bar with Auto-Oiler System
I have owned and used alot of saws.i wasnt sure about the 6200 but i bought it and cut up about 10 cords of wood the saw was great run like a champ will get another one if need be.
NEOTEC NCS6200 ProSeries Chainsaw | 62CC 20" Forestry Bar with Auto-Oiler System
NEOTEC NCS6200 ProSeries Chainsaw | 62CC 20" Forestry Bar with Auto-Oiler System
Best saw I’ve Owned. Packaged extremely nice, comes with all tools needed. Mine cranked up after a handful of pulls and need no adjustments or tuning. Very loud little hot rod. Cuts like butter and the oiler works fabulous. I may buy another to have a smaller one .
Excellent chainsaw
I've delt with a few manufacturers and individuals there in China and I must say NeoTec is where the bar is set . And it's set high . People actually call you back . Great company 👌
Product Comparison
Discover More Difference
with Cutting Attachment
with Cutting Attachment
at Idle Speed
at Idle Speed
FAQS
Cold Start
- Add fuel (fuel mixing ratio: 25:1).
- Close the choke. If the machine is equipped with a primer bulb, press it 3–5 times until the bulb is filled with fuel.
- Pull the starter rope 3–5 times.
- After hearing two “coughing” sounds,
- Open the choke.
- Pull the starter rope to start the machine.
Hot Start
- Open the choke.
- Pull the starter rope to start the machine.
The issue may be caused by an incorrect fuel mixture, spark plug problems, or a clogged carburetor.
- Check whether the fuel mixing ratio is 25:1. If not, adjust the fuel mixture to 25:1.
- Check whether the fuel line is bent or blocked.
- Check whether the spark plug is sparking properly.
- Check whether the engine is flooded.
- Check whether there is a carburetor malfunction.
- Confirm whether the spark plug is producing a spark: Remove the spark plug, connect it to the ignition coil, and place the spark plug electrode in contact with a metal part of the machine. Pull the starter rope and observe whether the spark plug produces a spark during starting.
- Check the electrode gap. The correct gap is 0.5–0.7 mm (approximately the thickness of a credit card).
- Clean oil residue and debris from the surface of the spark plug.
- If the engine still does not start after completing the above steps, replace the spark plug with a new one.
- Check whether the high-voltage wire (ignition coil lead) is damaged.
- Remove the spark plug.
- Turn the machine upside down.
- Pull the starter rope.
- Drain the excess fuel from the cylinder.
- Remove the air filter.
- Use an air blower to remove dust or debris from the air filter.
- If it cannot be cleaned or has been used for a long time, replace the air filter.