Neo-tec NH865 Gas Chainsaws fit 20in 24in Chainsaw Bar and Chain
Key Features
Less fatigue, more control - built for long cutting sessions.
Reinforced body,impact-resistant
High-Quality,Durable Chainsaw
Upgrade Highlights
Optimized CDI ignition system
Whether facing freezing temperatures or scorching heat, it delivers dependable, consistent power to keep you working without interruption.
Effortless cold start
Starts in just 3–5 pulls even in low temperatures, helping you save time and keep productivity up on chilly mornings.
Upgraded with a quick-release structure and quick-detach air filter cover for easier cleaning and maintenance
Speed-Automatic Oil Pump
The speed-automatic oil pump delivers adaptive chain lubrication in real time, ensuring smooth operation with reduced friction and effective overheat protection. It maintains optimal cutting performance and greatly extends the service life of the chain and guide bar.
Product Comparison
Discover More Difference
Neo-tec NH865 Gas Chainsaws fit 20in 24in Chainsaw Bar and Chain
$259.99 USD
Neo-tec NH872 70cc 71cc Best Gas Chainsaw fits 24in 28in Chainsaw Bar
$234.99 USD
FARMMAC F372W Gas Chain Saw 71 70cc 24 20 inch Bar Professional Logging Chainsaws
$299.99 USD
NH865FM
SKU
NH872US
SKU
F372WUS
SKU
2-Stroke
Engine Type
2-Stroke
Engine Type
2-Stroke
Engine Type
70.7cc
Displacement
70.7cc
Displacement
70.7cc
Displacement
3.9kW/ 5.2HP
Max Power
3.9kW/ 5.2HP
Max Power
3.9kW/ 5.2HP
Max Power
11000rpm
Maximum Engine Speed
with Cutting Attachment
with Cutting Attachment
11000rpm
Maximum Engine Speed
with Cutting Attachment
with Cutting Attachment
11000rpm
Maximum Engine Speed
with Cutting Attachment
with Cutting Attachment
2800rpm
Maximum Engine Speed
at Idle Speed
at Idle Speed
2800rpm
Maximum Engine Speed
at Idle Speed
at Idle Speed
2800rpm
Maximum Engine Speed
at Idle Speed
at Idle Speed
Pull Start
Start Type
Pull Start
Start Type
Pull Start
Start Type
FB 25:1 Fuel-Oil Mix Ratio,FD 40:1 Fuel-Oil Mix Ratio
Fuel to Oil Mix
FB 25:1 Fuel-Oil Mix Ratio,FD 40:1 Fuel-Oil Mix Ratio
Fuel to Oil Mix
FB 25:1 Fuel-Oil Mix Ratio,FD 40:1 Fuel-Oil Mix Ratio
Fuel to Oil Mix
🌳 Gardening + 🪵 Light Logging
Application
🪵Professional Logging
Application
🪵Professional Logging
Application
15 mins
Full-Load Running Time (Lab-Tested Reference)
15 mins
Full-Load Running Time (Lab-Tested Reference)
15 mins
Full-Load Running Time (Lab-Tested Reference)
Magnesium alloy
Crankcase Materials
Magnesium alloy
Crankcase Materials
Magnesium alloy
Crankcase Materials
Spring Buffer
Shock Absorption System
Spring Buffer
Shock Absorption System
Spring Buffer
Shock Absorption System
Aluminum Rubber Non-Slip Grip
Handle Bar
Aluminum Rubber Non-Slip Grip
Handle Bar
Aluminum Rubber Non-Slip Grip
Handle Bar
Speed-Sensing Automatic Oil Pump
Oil Pump
Speed-Sensing Automatic Oil Pump
Oil Pump
Speed-Sensing Automatic Oil Pump
Oil Pump
7Tx 3/8
Sprocket type
7Tx 3/8
Sprocket type
7Tx 3/8
Sprocket type
30”/75cm
Max Cutting Diameter
32”/80cm
Max Cutting Diameter
32”/80cm
Max Cutting Diameter
20”，24”，28”
Recommended Guide Bar Size
24”，28”
Recommended Guide Bar Size
24”，28”
Recommended Guide Bar Size
12 Month Consumer / 3 Month Commercial
Warranty
12 Month Consumer / 3 Month Commercial
Warranty
12 Month Consumer / 3 Month Commercial
Warranty
FAQS
Cold Start
- Add fuel (fuel mixing ratio: 25:1).
- Close the choke. If the machine is equipped with a primer bulb, press it 3–5 times until the bulb is filled with fuel.
- Pull the starter rope 3–5 times.
- After hearing two “coughing” sounds,
- Open the choke.
- Pull the starter rope to start the machine.
Hot Start
- Open the choke.
- Pull the starter rope to start the machine.
The issue may be caused by an incorrect fuel mixture, spark plug problems, or a clogged carburetor.
- Check whether the fuel mixing ratio is 25:1. If not, adjust the fuel mixture to 25:1.
- Check whether the fuel line is bent or blocked.
- Check whether the spark plug is sparking properly.
- Check whether the engine is flooded.
- Check whether there is a carburetor malfunction.
- Confirm whether the spark plug is producing a spark: Remove the spark plug, connect it to the ignition coil, and place the spark plug electrode in contact with a metal part of the machine. Pull the starter rope and observe whether the spark plug produces a spark during starting.
- Check the electrode gap. The correct gap is 0.5–0.7 mm (approximately the thickness of a credit card).
- Clean oil residue and debris from the surface of the spark plug.
- If the engine still does not start after completing the above steps, replace the spark plug with a new one.
- Check whether the high-voltage wire (ignition coil lead) is damaged.
- Remove the spark plug.
- Turn the machine upside down.
- Pull the starter rope.
- Drain the excess fuel from the cylinder.
- Remove the air filter.
- Use an air blower to remove dust or debris from the air filter.
- If it cannot be cleaned or has been used for a long time, replace the air filter.