NEOTEC 3-in-1 Leaf Vacuum with Bag and Leaf Mulcher, Gas Leaf Blower – 25.4cc 180 MPH 432 CFM Handheld Blower
Key Features
25.4CC Powerful Gas Engine
3-in-1 Multi-functional Design
18:1 High Mulching Reduction Ratio
Upgrade Highlights
Lightweight & Portable Body
Weighs only 10 lbs. Ergonomic lightweight structure ensures easy handheld operation without fatigue during long working sessions.
Adjustable Speed Control
Adjustable speed design allows flexible wind control for different debris and ground conditions, adapting to various cleaning scenarios.
Effortless Assembly & Operation
Simple structure for quick assembly and easy fueling. User-friendly for all operators without complicated steps.
Cord-Free Continuous Operation
Gas-powered & cord-free design eliminates battery limits, supporting long continuous work for outdoor heavy-duty cleaning.
Product Comparison
Discover More Difference
NEOTEC 3-in-1 Leaf Vacuum with Bag and Leaf Mulcher, Gas Leaf Blower – 25.4cc 180 MPH 432 CFM Handheld Blower
$149.99 USD
NEO-TEC Professional 52CC 2 Stroke Backpack Leaf Blower 180 MPH 470 CFM Commercial Lawn Care & Patio Maintenance NTEB809A
$159.99 USD
NEO-TEC 75.6CC Gas Backpack Leaf Blower 847CFM 236MPH 2-Cycle Powerful with Low Vibration Ergonomic Harness System
$229.99 USD
NTEBV260-US
SKU
NTEB809A-US
SKU
NTEB8850-US
SKU
2-Stroke
Engine Type
2-Stroke
Engine Type
2-Stroke
Engine Type
25.4cc
Displacement
52cc
Displacement
75.6cc
Displacement
1.8 HP / 1.3 kW
Max Power
3.0 HP / 2.2 kW
Max Power
4.5 HP / 3.4 kW
Max Power
25:1
Fuel to Oil Mix
25:1
Fuel to Oil Mix
25:1
Fuel to Oil Mix
180 MPH / 80.5 m/s
Air Speed
220 MPH / 98.4 m/s
Air Speed
260 MPH / 116.2 m/s
Air Speed
450 CFM / 12.7 m³/min
Air Volume
680 CFM / 19.3 m³/min
Air Volume
950 CFM / 26.9 m³/min
Air Volume
Handheld
Operating Mode
Backpack-mounted
Operating Mode
Backpack-mounted
Operating Mode
Round+ Flat
Nozzle type
Round
Nozzle type
Round
Nozzle type
Yard Leaf Cleaning √
Application
Medium Yard/Villa: Large-area leaf cleaning, driveway gravel removal, light snow blowing
Application
Farm/Park: Orchard leaf cleaning, construction site dust removal, medium snow blowing
Application
12 Month Consumer / 3 Month Commercial
Warranty
12 Month Consumer / 3 Month Commercial
Warranty
12 Month Consumer / 3 Month Commercial
Warranty
FAQS
Cold Start
- Add fuel (fuel mixing ratio: 25:1).
- Close the choke. If the machine is equipped with a primer bulb, press it 3–5 times until the bulb is filled with fuel.
- Pull the starter rope 3–5 times.
- After hearing two “coughing” sounds,
- Open the choke.
- Pull the starter rope to start the machine.
Hot Start
- Open the choke.
- Pull the starter rope to start the machine.
The issue may be caused by an incorrect fuel mixture, spark plug problems, or a clogged carburetor.
- Check whether the fuel mixing ratio is 25:1. If not, adjust the fuel mixture to 25:1.
- Check whether the fuel line is bent or blocked.
- Check whether the spark plug is sparking properly.
- Check whether the engine is flooded.
- Check whether there is a carburetor malfunction.
- Confirm whether the spark plug is producing a spark: Remove the spark plug, connect it to the ignition coil, and place the spark plug electrode in contact with a metal part of the machine. Pull the starter rope and observe whether the spark plug produces a spark during starting.
- Check the electrode gap. The correct gap is 0.5–0.7 mm (approximately the thickness of a credit card).
- Clean oil residue and debris from the surface of the spark plug.
- If the engine still does not start after completing the above steps, replace the spark plug with a new one.
- Check whether the high-voltage wire (ignition coil lead) is damaged.
- Remove the spark plug.
- Turn the machine upside down.
- Pull the starter rope.
- Drain the excess fuel from the cylinder.
- Remove the air filter.
- Use an air blower to remove dust or debris from the air filter.
- If it cannot be cleaned or has been used for a long time, replace the air filter.